header
Turbine Column Page
Search this site
Go to the Bottom of the Page
Home Page
Borecasing & Screens
PVC Pipe & Components
Clearbore
Baroid Drilling Fluids
Pump Components
Manufacturing Capabilities
Drilling Products
Data Sheets
Rentals
Desalination
Sand Spears

6 Reasons to use our Column.

  1. 100% Guaranteed for 5 years.

  2. Lower your maintenance cost on your pump repair due to it's long life.

  3. Manufactured to suit your Requirement.

  4. Avoid handling accidents due to it's light weight properties.

  5. Lower iron oxide problems.

  6. Save power cost due to lower friction.

Rust proof your Column

This is ridicules less than two years life from column my last column lasted 20 years. Is this what you are saying?Over the last 5 years we are seeing a massive drop in Steel column life used for a turbine pump in a water bore. “Why is this so?” as one great professor would say, there is only theories at this point in time but the theories put forward are the steel is not of the same quality, there are more stray voltages specially DC than previous times and higher voltages, water quality has changed and a lowering of the water table and it is believed a small change in some of the chemicals in the water and PH can have major adverse effects to the steel column in irrigation bores.

This is why we have come up with using PVC a s a column material it is not effected by any of the above conditions, this column cannot be used in every bore were steel was but it may be able to be used in your bore. So contact us and find out if you can use this great product in your Bore.

A column Pipe that won't rust out

Material:

PVC Pipe

Bearing Retainer Bronze Casting

Hi Carb Rubber Bearings

Stainless Stell Shaft

Brass Alloy Shaft Joiner

Adaptors to Pumps and

Discharge Heads Available

Sizes:

150mm & 200mm Diameter

Advantages:

Non Corrosive

Chemical Resistant

Low Installation Times

Non Toxic

Lightweight

Comes in 4" and 6"

Suitable to depths of 42 metres.

Can be adapted to all makes of pumps and discharge heads.

Can be made to suit Southern Cross Pumps.

Home Page Site Map Contact Us
Return to top of page
Web site by www.SimplyRapidWebBuilding.com