Click the arrow below to go to

AQUAGEL - API grade wyoming sodium bentonite.

HOLEPLUG sodium bentonite is a naturally occurring Wyoming sodium bentonite clay that is sized and graded chip material used to seal and plug earthen boreholes.
HOLEPLUG bentonite is available in two particle size grades:
HOLEPLUG 3/4" grade (100% of particles pass through 3/4" screen; all particles retained on 3/8" screen)
HOLEPLUG 3/8" grade (100% of particles pass through 3/8" screen; all particles retained on 1/4" screen)

BAROID® BENTONITE PELLETS Sealing and Plugging Material   

BAROID® bentonite pellets are compressed, shaped pellets of high-yielding, untreated Wyoming bentonite. BAROID bentonite pellets are available in three sizes: 1/4", 3/8", and 1/2".

Applications/Functions

Can seal or grout plastic or steel casing
Can isolate screen intervals, subsurface instrumentation, and sampling zones
Can provide a protective interface between gravel pack and cement grout
Can plug abandoned earthen boreholes and cavities
Can create a stable, permanent below-grade seal in:
monitor/observation wells
dewatering holes
caisson holes
soil sampling holes
mineral exploration holes
water wells

POLY-BORE™ Borehole Stabilizing Dry Polymer   
POLY-BORE™ polymer is a free flowing, water-soluble, easy mixing, 100% dry granular polymer.
POLY-BORE polymer is a very high molecular weight partially hydrolyzed polyacrylamide (PHPA) polymer. When mixed with fresh water, a small quantity of POLY-BORE polymer provides a clear, solid-free, viscous borehole stabilizing fluid for use in drilled shaft, auger drilling, horizontal directional boring, trenching excavation and reverse circulation (RC) rotary drilling. POLY-BORE polymer is not designed to be used in conjunction with bentonite-based fluids.

QUIK MUD® D-50 liquid polymer dispersion is a high-solids, partially-hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer used primarily as a viscosifier and borehole stabilizer to prevent reactive shale and clay from swelling and sloughing. QUIK MUD D-50 liquid polymer dispersion can be used to provide friction reduction, inhibition and lubricity in freshwater, KCl and saltwater-based drilling fluids.

EZ-MUD GOLD clay and shale stabilizer, helps provide inhibition of clay and shale formations in water-based drilling fluids without substantially increasing viscosity.
EZ-MUD GOLD stabilizer, when added to a QUIK-GEL® or BORE-GEL® slurry, yields an inhibitive drilling fluid system while maintaining manageable and effective fluid properties. The unique beaded structure of EZ-MUD GOLD stabilizer allows the material to be mixed easily at minimal shear, eliminating the need for liquid emulsions.

QUIK-TROL® Filtration Control Additive

 QUIK-TROL® modified natural cellulosic polymer provides filtration control in most water-based drilling fluids. QUIK-TROL polymer, when added to a QUIK-GEL® slurry, yields a drilling mud system suitable for drilling in sandy formation.

QUIK-TROL polymer can be added to vegetable or mineral oil to provide an oil-based fluid suspension, which can be poured into drill string directly. QUIK-TROL polymer is also used in air/gel-foam drilling.

PENETROL® Wetting Agent   

PENETROL® water miscible, non-ionic wetting agent is designed to help counteract the sticking tendencies of clay.

AQUA-CLEAR PFD concentrated liquid polymer is a dispersant that provides superior mud and sediment removal from the producing formation and gravel pack. This product is also a highly effective mud thinner and contains no phosphates.

NO-SAG biopolymer is free-flowing, powdered and easily dispersed. It helps enhance the carrying capacity of both clay and polymer-base drilling fluids without significantly increasing the viscosity of the slurry.

Sand

8/16 sand is a common size that drillers used when needing a gravel pack around the screen

To Purchase on-line

click on the Cash Regester